EMC Certification

pass4side has assembled to take you through 120 Q&As to your e20-855 Exam preparation. In the e20-855 exam resources, you will cover every field and category in e20-855 helping to ready you for your successful Juniper Certification.

Quality and Value for the e20-855 Exam

pass4side Practice Exams for EMC e20-855 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your e20-855 Exam

If you prepare for the exam using our pass4side testing engine, we guarantee your success in the first attempt. If you do not pass the EMC Certification e20-855 exam (Networked Storage-SAN Expert for Implementation Engineers) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

EMC e20-855 Downloadable, Printable Exams (in PDF format)

Our Exam e20-855 Preparation Material provides you everything you will need to take your e20-855 Exam. The e20-855 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

　
　
Exam : EMC E20-855
Title : Networked Storage-SAN Expert Exam, Implementation Engineers


1. Click the Exhibit button. The customer added a new iSCSI server to the MP-1620M. They can not access the storage array on IP address 10.19.9. The customer's network is setup for Fast Ethernet. Please see exhibit. What is the issue?
A. Port Speed setting is wrong
B. Port Parameter setting is wrong
C. Autonegotiations setting is wrong
D. iSCSI/iFCP parameter setting is wrong
Answer: A

2. Click the Exhibit button. The customer has multiple MDS 9500 and MDS 9200 directors and switches. They need to have the firmware of the MDS 9216 upgraded. The Fabric Manager's Software Install Wizard shown in the exhibit shows a problem that must be addressed before continuing the upgrade. What is likely to be the problem?
A. The file copy mode is wrong
B. The system file is wrong type
C. The Kickstart file is wrong type
D. Fabric Manager is the wrong version
Answer: C

3. Your customer has recently purchased a second site and is now in the process of connecting the second site to the existing environment. Customer is using DS16B2, DS32B2 and ED-24000B switches and directors. Sever problems, such as unstable and unmanageable fabric, occurred after connecting the two sites with an MPR 7420. How could this have been prevented?
A. Set all member switches WAN_BB to 256
B. Set all member switches PID format set to 0
C. Set fabric parameters WAN_TOV and ED_TOV
D. Set Management Server on the multi-protocol router to disable
Answer: D

4. Which MP-2640M feature enhances the security of the environment when you are ocking down?the domain IDs of E-ports or R-ports?
A. Set FCID
B. Lock FCID
C. Insistent Domain ID
D. Persistent Domain ID
Answer: C

5. Click the Exhibit button. What is the calculated cost from host to storage, in the diagram, if a link fails in a port channel group?
A. 250
B. 375
C. 500
D. 1500
Answer: C

6. Customer has implemented HP-UX Campus Cluster using dual-lock disks. They have experienced "split brain" syndrome in the past. What is a permanent fix for this problem?
A. Unlock cluster lock disks
B. Implement a single lock disk
C. Add one more node to both sides of the cluster
D. Implement multiple network and heartbeat configurations for each node in the cluster
Answer: D

7. Your customer is implementing a META SAN in a B-series AP-7420B environment. They want to connect a host from fabric A with storage in fabric B. The host is connected to port 14 on the switch with Domain ID 2. The storage port is on port 7 on a switch with Domain ID 4. The customer created in both of the fabrics the zones with the following command: zonecreate "lsan_hostA_storageB", "2, 14" and zoneadd "lsan_hostA_storageB", "4, 7". After enabling the config the customer cannot see the storage. What went wrong?
A. InterVSAN Routing was not enabled
B. Used the wrong ports for the zoning
C. VSAN parameters are not configured correctly
D. Port and Domain IDs are not valid for LSAN zoning
Answer: D

8. Your customer has three fabric islands. One fabric island has three ED-1032s. Two other fabric islands have two DS16B2s in each. The customer wants to migrate to two fabrics built of two MDS 9509s in each fabric. Several SUN Solaris servers must be migrated on-line to the new fabrics. What are two [2] steps required to perform this migration?
A. Disable one path to the fabric
B. Apply the zoning to the new switch
C. Reactivate the disabled path on the new fabric with PowerPath commands and set the speed to 1GB
D. Reactivate the disabled path on the new fabric with PowerPath commands and set the speed to 2GB
Your customer has three fabric islands. One fabric island has three ED-1032s. Two other fabric islands have two DS16B2s in each. The customer
wants to migrate to two fabrics built of two MDS 9509s in each fabric. Several SUN Solaris servers must be migrated on-line to the new fabrics.
Answer: AC

e20-855 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs)

Our EMC EMC Certification e20-855 Exam will provide you with exam questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the e20-855 Exam:100% Guarantee to Pass Your EMC Certification exam and get your EMC Certification Certification.